TopsDecor.com Home Decor Ideas
A Murphy bar is a fold-down structure that can be adjusted or pulled against the wall for use. This is a perfect solution for any small space and for when you just don’t want that bar to become an eyesore. When it is folded, you can put some pots on it, and when not, you can serve all kinds of food and drinks you want and surprise your guests. I think it is a perfect and fresh idea for outdoor parties, no need to search where to put a bar. So how can you make one? Let’s have a look.
First, decide what type of wood you want to use. You can recycle some pallets, or if you need new wood, choose cedar as it is ideal for outdoor furniture as it is naturally rot and insect resistant and is a strong wood that will not warp or sag over time . If left uncolored, it will age to a weathered gray finish.
If you have decided on pallets, disassemble them: turn the pallet over and cut the bottom slats close to the sides with a jigsaw. This makes removal from the center board much easier. You can then remove the top slats from the back using a hammer. Remove and discard all nails.
Decide on the size of the box because a Murphy bar is actually a box with two parts, one attached to another. The wood should be cut with a power saw, carefully measuring each piece and cutting it to fit. Assemble the side, top and bottom pieces to create the frame. Make sure they are assembled accurately using a level or T-square. Before assembling, carefully apply wood glue to both sides of where the pieces meet. Then attach them with wood screws, making sure to quickly remove any excess wood glue that is visible.
Next, place the back top, middle, and shelf pieces, making sure all are flush and square. Install and attach them to the frame. Center the full-length hinge and then attach it to the front piece of plywood using the screws provided with the hinge. Make sure the other side of the hinge is attached to the lower part of the bottom part of the pole. Test the hinge to make sure the front closes and opens properly.
