You don’t want to endanger the health and safety of your family from poorly installed electrical lines or systems, or suffer fire accidents due to electrical issues. In a worse scenario, serious injury and even death can be caused by improper handling of equipment and electrical wiring, and electrical outlets.
Learn the importance of hiring an emergency technician to keep your home safe by reading below.
Avoid electric shock
According to the Report 2004 to 2013 According to the US Consumer Product Safety Commission, the age of electrocuted victims appears to be a factor in the number of incidents. Victims aged 40 to 59 are three times more susceptible to electrocution than victims aged 19 and under.
The most common product categories related to electric shock from 2010 to 2013 were ladders with 15 electric shock. Small devices with 21 electric shocks; and large appliances with 31 electric shocks. Therefore stop Emergency Electrician AdelaideWhen you are around, this is vital for home security.
Perform an assessment of the power system
Electrical failure occurs when you do not have the right size of fuses and circuit breakers, resulting in an electrical emergency. You need a professional electrician to ensure that you use the correct size of fuses and circuit breakers.
The electrician will look at your electrical panel and properly label it with the sizes of a circuit breaker or fuse for you to refer to later. An assessment of the power system is also carried out to ensure home safety.
Here are the benefits of evaluating the power system:
- Improves the reliability of the electrical system
- Evaluates the overall condition of your electrical system
- Helps prioritize improvement needs of the power system
- Provides documentation on the electrical system
Get advice from experts
The best person when it comes to electrical safety is a licensed electrician. When you hire an experienced and qualified electrician, you can get expert advice on reducing or eliminating electrical hazards in your home or tips on electrical safety.
Here are some steps you can take to avoid electrical hazards in your home:
- Do not mix electricity and water by protecting your electrical equipment from moisture and water. Design your home so that you can store your devices properly to prevent cables from accidentally falling into the water. In this case, make sure that the power supply in your switchboard is interrupted before you disconnect the device from the mains or take it out of the water.
- Check your devices for repeated releases, knocks, or bumps. Do not use the device until a professional electrician has checked your machine and your entire electrical system.
- installation of Residual current circuit breaker or GFCI is a requirement when building new homes. You may want to consider installing a RCD if you are designing and renovating an older home for home security. It is used to detect earth faults or current leaks in electrical circuits. It also helps prevent burns, electric shock, and electric shock.
Resolve electrical emergencies
Troubleshoot electrical problems can be difficult for a typical homeowner. On the one hand, working with electricity is dangerous because it can lead to electric shocks or electrical fires. Some electrical problems require the help of an electrical emergency repair company. Because of this, you need to be vigilant when observing some warning signs that may require emergency service.
Here are some examples:
- Strange burning smells: The plastic insulation on electrical cables can melt if they get too hot. If you ever notice a burnt plastic odor or a burnt metal odor, you suspect a serious problem. Turn off your breakers and call for help.
- Sparks or smoke from electrical outlets: This sign is very dangerous, so you need to turn off the circuit breaker and immediately call the fire department to determine an electrical fire. A non-electrician will carry out the repair service as soon as your home is safe.
- Burn marks on sockets: If you see dark or brown burn marks on the electrical outlets, there is an electrical problem.
- Devices and appliances have very hot power cords: Do not use the socket until it is secure.
- Flooded basement: Do not go into the area where equipment such as flooded basements has come into contact with water. Call your electric company to have your electricity temporarily turned off at home, then contact an emergency electrician.
Conclusion
It is important to use an emergency electrician so you are prepared for major problems with the electrical system. Never deal with electrical problems without proper knowledge or when you are unsure of what to do. Don’t compromise your health and safety to save money on electrical repair services. It is best to turn to a trusted, reputable, licensed emergency electrician for solving minor and major electrical problems.