Technology is about making life easy and enjoyable. And that is exactly what the touchless kitchen faucet does. As a motion activated faucet, this type of faucet is turned on by a simple shaft on its sensor. With this smart technology, homeowners can operate the faucet with ease and create unforgettable experiences. Plus, your kitchen is a very busy place. Imagine holding something in your hands and trying to set the stove and you have to start the tap. It can be awkward, right? Well, this is where the touchless faucet comes in. You can turn it on and off by simply waving the sensor.
In addition, the non-contact technology eliminates the contamination that is often caused by touching with bare hands. If you’re a tech fanatic, consider investing in a no-touch faucet. Bring it into your kitchen and watch your experience change. Remember that you only have to wave at the sensor to turn it on. With that in mind, here is everything you should know to hope a touchless kitchen faucet will work and other important information.
The working principle
A non-contact, motion-activated water tap is also designed Sensors. The sensors automatically detect any movement, which automatically starts the water flow. All you need to do is wave on the sensor and it will detect the movement. This will open the flow of water into the faucet. There is also a separate control unit that can be used to regulate the water temperature. With this device you can set the desired temperature. You can also adjust the water flow using the faucet handle.
Power supply options
Taps come in different categories. While some run on batteries, others only rely on it Power supplies. It depends on your brand. Make sure to ask your supplier about the power source of your adapter.
Tips on buying a touchless faucet
Buying a touchless motor tap can be a daunting task – especially for beginners. Also, there are numerous brands on the market today. It is therefore good to know what to look for in a contactless motor tap. Here are key points to help you achieve that best touchless kitchen faucet.
Positioning the motion sensor
The position of the motor is an important consideration when purchasing a non-contact motor tap. While some sensors are on the spout, others are either up or down. Remember, the position of the motor determines how you operate your faucet. For example, there is a Moen faucet with two sensors – the shaft sensor is on top and the readiness sensor is on the bottom. The water is started by simply waving at the wave sensor. On the other hand, if you place objects on the sink, the readiness sensor is activated. This makes operation easy. Therefore, determine your needs when purchasing your faucet. Where should the sensor be located? These are the things that you should be guiding regarding sensor location.
Switch on the sensor
If your faucet uses a power adapter when you turn it on, make sure there is an electrical outlet near the sink. Alternatively, you can opt for a battery-operated faucet with a sensor.
When purchasing your touchless kitchen faucet, consider the height of the tap, the length of the retractable hose, and the installation specifications.
Contactless kitchen fittings
Non-contact kitchen taps consist of 4 main parts. They include:
- Sensor window
- magnetic valve
- Energy source
The sensor is located on the lip or bottom of the spout and is an important aspect of any non-contact kitchen tap. Non-contact faucets come with presence sensors that detect the presence of your hand when waved under the spout. When the hands are recognized, the tap is switched on. And when you remove your hands, the sensor turns off the tap. Non-contact taps come with infrared light that is near the infrared detector.
The principle of operation of the sensor is simple: signals from the sensor trigger the valves to turn the tap to switch on. Other non-contact faucets also use an ultrasonic supply sensor to turn on the faucet valve.
Another important part of a touchless faucet is the solenoid valve. The solenoid valve – an electromagnet – is usually controlled by the faucet sensor. The valves push and pull the tap depending on the polarity of the electricity. The water flow is controlled in the membrane valve. The rubber-like disc is used to control the water flow.
- Energy source
There are different types of power sources. And every touchless kitchen faucet needs one to operate. Common types of power sources for these devices include:
- Dry batteries
- AC transformer low voltage current
The outlet serves to hold the working parts of the tap. Sinks come in a variety of materials – including zinc, brass, and copper. Before you decide on a touchless kitchen faucet, determine the material of the spout. It determines the durability as well as the appearance of your device.
Common problems with a non-contact faucet
Touchless kitchen fittings save a lot of water. They also help prevent disease, making them a popular option in many households. But they have numerous problems – including:
Additional energy costs
Non-contact kitchen taps are great, of course, to save water. However, they need a working battery to operate. When the battery runs out, you will have to spend more money on replacing it – which increases energy costs. The batteries also need to be charged regularly – a factor that increases the cost of running a touchless kitchen faucet.
Temperature control settings of a touchless kitchen faucet that cannot be changed.
With a touchless kitchen faucet you have to hire an installation expert. This can cost you more money.
The cost of purchasing a non-contact kitchen faucet is still high.
The bottom line
The invention of a touchless kitchen faucet is one of the best happenings in the industry – especially when it comes to saving water. You use superior sensor-based technology. However, in order for your faucet to give you the service you need for years to come, you need to properly maintain it. And it starts with knowing how it works. The information above contains the basics to help you properly maintain your kitchen tap.