Home / Decoration / How to repair a broken drain under a concrete slab, house or swimming pool

How to repair a broken drain under a concrete slab, house or swimming pool

A broken drain under a concrete slab, house or swimming pool is not a trivial situation. Pipes are often out of sight and mind for most people, but once broken they open their eyes. If your home suffers from such an event, you should consider repairing the broken drain as soon as possible.

A defective drain immediately affects your home. When a pipe breaks for the first time, you may not find any problems, but you can diagnose them.

The following signs are an early sign that you have broken a pipe or drain:

Wet spots.

Concrete slabs are porous. If your building’s concrete slabs are wet, this can be a sign of a broken drain. If there is hot water in your house and the pipe is leaking, you may notice or feel warm spots. This would indicate that it may not be the drain.

Sound of running water.

If you hear the sound of running water when not in use by anyone, there is a good chance that a pipe is leaking or broken.

Moist and moldy furniture.

If your furniture, which is standing on a concrete slab, feels damp and shows mold, it can cause leaks. This is due to the fact that the structure of your house gets damp and causes mold due to the leak.

Cracked concrete.

If your building or swimming pool base is cracked, there may be a leak that has affected the structure of your building.

High water bill.

If you notice an unusually high water bill, it can often indicate that you have a serious leak in a supply line in your home.

If you notice any of the above signs, you need to check your pipes immediately as the wetness of the plate can develop into a bigger problem. The moisture in a panel can spread to other areas of your house and cause the structure of the house to become wet, making your house fragile and very expensive to repair. In the worst case, a broken drain can cause the risk of concrete cancer. Concrete cancer occurs when the water from a pipe leak in the plate comes into contact with the steel. This can spread out and cause the concrete to tear. Sometimes the concrete may flake off, causing sections to break off.

So the big question is how can you fix this problem.

Fixing a plate leak is not an easy task. Trying to fix a leak is a task that you should do best Orange County Slab leak repair Professionals. If you try to fix the problem yourself and are not familiar with the techniques required to fix a crack, you can make the problems worse. Many laypeople cannot even locate the leak, let alone fix it. However, it is a good idea to understand the basics of each repair method so that you know what the plumber is talking about.

The most common methods of repairing a broken pipe are:

Relining pipes– No digging required! .Relining pipesUses advanced resin technology to create a new pipe inside the broken one; Therefore, use it to reline the pipe. A professional pipe supplier usually uses a combination of resin and synthetic fiber to create a strong and tough new pipe. The work will be quick and no damage should be done. This is the most efficient and effective way to repair a leak and is usually the cheapest.

Excavation and laying method – This method is very different from relining as some digging is required at the exact location of the leak in your building. Once the plumber has found the leak, he will repair or replace the pipe (if necessary) and rebuild the concrete. Using this method creates a lot of chaos. So you need to be prepared to cover or move all of your furniture if you don’t want your valuables damaged. It’s a pretty dangerous job too, so it’s best left to the professionals.

Redirection method– If your house’s plumbing begins to age, it is better to relocate the entire house’s plumbing than to repair it This method creates a new connection across the walls of the house. Pipes then enter the trenches and soil around the house. The weakness of this method is that the cost is very high and the new pipes can be exposed to the outside of the house.

Final thoughts

No matter which method you choose, always look for a specialist who will help you. The relining of pipes is the fastest and most common way to attach a cracked pipe. It does not require excavation and is therefore often the method of choice for many people. Always remember to watch out for moisture and the signs above. If you are unsure whether you have a leak, contact your friendly plumber.