The most common problems with the toilet

The toilet is one of the busiest places in the house. On average, you need to go to the bathroom at least three times a day. But some people even go to the bathroom 8 times or more a day. This means only one thing: this is a must in your home.

So if you encounter or discover a toilet problem, it is important that you fix it as soon as possible. The most common problems with the toilet are clogging, poor flushing, leaks, noisy flushing, etc. so this is what you should do Consider buying a non-clogging toiletthat has a powerful flushing system. In this post we have listed some of the most common toilet problems and how to deal with them. These are as follows:

Toilet flush problems

This is one of the most common toilet problems. It could be a toilet that doesn’t flush effectively, a toilet that flushes slowly, or a toilet that doesn’t completely flush. If a toilet with flushing problems is not resolved, it can cause stagnant water, creating health risks, bad smells and increasing the likelihood of more severe blockages developing. Some of the things that can lead to a weak flush are:

a) Blocked siphon jet or edge holes

These holes are located under the rim of the toilet bowl. As the toilet is used over time, these holes become blocked with water. This is a minor problem as it can be fixed by simply cleaning the holes with wooden sticks or other hard bristle tools. If you’re not sure this will work, you can also hire a plumber to do a hydrochloric acid wash to make sure it’s well cleaned and unlocked.

b) An old toilet

If you have an old model of toilet, flushing issues can also arise. This may be because the old toilet with its design cannot produce a high performance flush or it is not designed to work with the current plumbing or plumbing in the newest households. If this is the case, then you should contact an experienced plumber and have your old toilet replaced.

c) A loose flush handle

If your toilet flush handle becomes loose or detached from the main tank, flushing can become a problem. However, this can easily be remedied by reconnecting the lift chain or wire that connects the lift arm to the lapper. Alternatively, you can adjust the handle mounting nut in the tank. Note that it has inverted threads that must be turned counterclockwise to secure.

d) One bad mouth

Another cause of toilet flush problems is a faulty valve. If the clapper is loose, soaked, or a less tightened clapper valve, this can result in incomplete or poor flushing. If you check and find out that this is the cause, the solution is very simple. Get a professional plumber to replace the bad or loose flap with a new one and the problem will be solved.

Problems with toilet leaks

Toilet leakage is also another common toilet problem. Toilet leaks can occur in several places as follows:

a) base leaks

If you find that your toilet is shaky or unstable, or there is a puddle of water at the bottom of the toilet, you know that you have a problem with the wax ring seal that is usually on the bottom of the toilet. If you have such a problem, stop using the toilet immediately. Also, you should contact a professional plumber and get the problem fixed. In this case, don’t be surprised if the plumber removes the entire toilet to fix the problem.

b) Multiple leaks

The toilet comes with at least 5 additional seals to prevent the toilet from leaking. These seals are located between the tank and the bowl at the bottom of the flap and the fastening screws. If you have multiple leaks but don’t know where they came from, try tightening the screws and see if the leak goes away.

c) Water from the side of the tank

If the tank is cracked, water may leak out of the cracked part. Check what the problem is. If it is a cracked tank, you need to buy a new tank and replace the old one.

d) Low water level in the bowl

Have you ever woken up to find that a lot of water has left your toilet? There is nothing to panic about, but you should be able to pinpoint the problem. In most cases this is caused by a partial clogging of the toilet system causing water to be sucked out of the bowl. In rare cases, a crack in the bowl’s inner plumbing can result in less water in the bowl. Dealing with a clog is easier than replacing a cracked pipe. If the pipe breaks, you will have to change the entire toilet bowl. It’s very expensive.

Problems refilling the toilet

a) A constantly running toilet

A constantly running toilet is one of the biggest nightmares a homeowner can suffer. Having a running toilet not only increases your water bill, it also makes noise and you may not get discounts if you have an EPA WaterSense certified toilet installed. if your state provides one.

Usually this is caused by a poor fill valve or a poorly connected flapper. Check the water level to locate the problem. If you cannot identify the problem, call an experienced plumber and have them identify the problem and fix the toilet. Don’t waste time, and you’ll end up saving your water bill and preventing other toilet problems from getting worse.

b) Automatic refilling

Aside from being constantly on, a toilet can fill itself without you flushing it. When you experience such a problem, you simply know that you have a ‘phantom washer’. A phantom washer indicates that there is a small leak from the tank into the bowl, causing it to need filling. As explained above, this may be due to a poorly connected flap. The best measure is to replace the door.

Blocked toilet

This is one of the toilet problems many people face, and it’s also one of the easiest to deal with. All you need is a flange and if the clog is stubborn you can get a drain snake. You can do this yourself and you don’t need a plumber to do it.

Conclusion

If you find that your toilet is facing any of the above issues, instead of allowing it to escalate, get it fixed right away. The most common toilet problems are DIY projects, and few require the services of a professional plumber. Make sure you have the right tools when repairing your toilet. If you are not sure, just contact a professional plumber.