Higher water pressure generally makes showers more comfortable, but it also increases your water bill!
Just because the water company can deliver water at very high pressure does not mean that you have to keep the water pressure in your home that high.
The average water pressure in australia is 40-45psi. However, this number is not set in stone, it can go up to 60 psi. Unfortunately, when the water pressure is too high a number of problems can arise:
Knock in your pipes is generally the result of excessive water pressure. Closing a valve results in a pressure backflow that fills the incoming supply and causes the pipes to wobble. They strike against their fittings or their surroundings, dramatically increasing the chance of a joint fracture.
If the water pressure is too high, your device will have to work harder to do its job. This effectively shortens the lifespan and leaves you with the expensive task of buying a new device.
If your taps are leaking and you don’t seem to be able to prevent this, the water pressure may be set too high. The mere pressure of the water forces small pieces of water past the joints.
The same principle can make the toilet work, as water is forced past the membrane into the bowl. This usually happens at night when it has been used for a while.
What should I do
If you think you have any of the problems above, this is a good idea Get your plumber Sydney as quickly as possible. They can evaluate the problem and help you fix it quickly and efficiently.
Even if you don’t already have a problem, buying yours is a good idea own water pressure gauge, these are available for only $ 20.
It is a good idea to test your water pressure multiple times over several days. The highest water pressure is probably around 2 a.m. In this case, very few people ask for water from the system.
If your pressure is consistently above 50 psi, you need to take remedial action.
Getting the pressure right
You now have to decide which print suits you best. Indeed, it is a matter of personal preference. The lower the water pressure, the less water you use and the cheaper your energy bills are. However, the higher the water pressure, the more enjoyable some activities, such as showering, become.
You have to find the right balance. Before doing this, however, you need to install a pressure control valve. This should allow you to change the water pressure between 24 psi and 70 psi. The best approach is to start low and crank it up until you are happy with the result.
It is a case of trial and error, but the result is worth it.